Documentation & Support Center

Please note that manuals do not ship with our products unless specified in the description. However, all manuals may be downloaded from our web site at no charge.

• EtherMeter^®
  Meter Gateway For SCADA, Telemetry, & Building Automation Systems
  Model EM-100
  
  • Datasheet
  • Manual (for equip. manufactured on/after 12/22/2022)
  • Meter Compatibility Matrix (for equip. manufactured on/after 05/17/2015)
  • New!: Pre-Start CheckList - Please Review!
  • Pre-Start CheckList + Dip Switch Change Summary
  • Dip Switches Change Summary (hardware v.257+ vs hardware v.256)
  • NEMA-6P/IP-68 Option Datasheet
  
  Application Notes (PDF):
  • 001: Tuning Flow-Rate Calc Params
  • 002: Config. EtherMeter & MicroLogix/SLC Comm Using EtherNet/IP
  • 003: Config. EtherMeter & MicroLogix/SLC Comm Using DF1
  • 004: Config. EtherMeter & MicroLogix/SLC Comm Using 1761-NET-ENI
  • 005: Config. EtherMeter & CompactLogix/ControlLogix Comm Using EtherNet/IP
  • 006: Connnecting A Sensus Omni Meter (T2, C2, F2) To An EtherMeter
  • 007: Config. EtherMeter & Koyo DL06 Comm Using Modbus/TCP, Modbus/RTU
  • 008: Config. EtherMeter & PLC For Pulse-Based Batching
  • 009: Config. Sensus Water & Gas Meters For Maximum Flow & Total Resolution
  • 010: Touch-Read Filter (TRF-D) Wiring Procedures
  • 011: Config. EtherMeter For Thermistor Analog Input
  • 012: Parallel EtherMeter, Radio-Read, and Touch-Read
  • 013A: Sample Co-Metering Request Letter for EtherMeter,SDA(W) - pdf
  • 013A: Sample Co-Metering Request Letter for EtherMeter,SDA(W) - docx
  • 013B: Sample Co-Metering Request Letter for Universal Duplexer - pdf
  • 013B: Sample Co-Metering Request Letter for Universal Duplexer - docx
  • 014: Sensus High-Speed Pickup (Pulse) Register With The EtherMeter
  • 015: Using the EtherMeter's Analog Flow Signal Output Firmware (Deprecated: Recommend Use: EMP Signalizer)
  • 016: Connecting EtherMeter to Sensus Omni Encoder+Pulse Signals.
  • 017: Schneider Electric Energy Systems (SEES) Custom Firmware Notes.
  • 018: Iridium Satellite Custom Firmware Notes.
  • 019: McCrometer FlowCom/EtherMeter Connection Notes.
  • 020: Totalizing a 4-20mA Signal Using the EtherMeter and the APD-7500-SS-D. (Deprecated. See App Note 34.)
  • 021: Kamstrup FlowIQ Customer Firmware Notes.
  • 022: Radio-Read Filter and Kemp-Meek VL9 VisuLink Notes.
  • 023: Config. EtherMeter & Allen Bradley Comm Using the Bell 202 Modem.
  • 024: Adjustment of EtherMeter’s LCD Display Text Contrast. (Deprecated: Newer EtherMeters Auto-Adjust LCD.)
  • 025: Upgrade from Act-Pak Analog to EtherMeter Digital Instrumentation.
  • 027: Upgrade from Tricon/E3 Analog to EtherMeter Digital Instrumentation.
  • 028: Nicor Cable Connection to Model SDAW AMI Duplexer.
  • 029: Connecting EtherMeter to EvoQ4 Encoder and Pulse Signals.
  • 030: 4-20mA Flow Signaling from Compound Meters Using an EtherMeter.
  • 031: Connecting EtherMeter to Master Meter Octave Encoder+Pulse Signals.
  • 033: EtherMeter at US Armed Forces Facilities.
  • 034: EtherMeter + MTP Module for Meters with 4-20mA Flow Output.
  
  Common Water Meters - Information (PDF):
  • Sensus Meters: Resolution Vs. Size Chart
  • Neptune ECoder- and ProCoder-Based Meters: Resolution Vs. Size Chart
  • Neptune Pro-Read-Based Meters: Resolution Vs. Size Chart
  • Neptune TruFlo: Retrofit Chart
  • Neptune Flow Meters - SCADA Signaling
  • Metron-Farnier innov8-Based Meters: Resolution Vs. Size Chart
  • Badger Meters: Resolution Vs. Size Chart
  • Mueller Translator Registers: Resolution Vs. Size Chart
  • Mueller HbMag: Resolution Vs. Size Chart
  • Honeywell/Elster evoQ4 MagMeters: Resolution Vs. Size Chart
  • Honeywell evoQ4 Magnetic Flow Meter - SCADA Signaling
  • McCrometer and Water Specialties Prop Registers: Resolution Vs. Size
  
  Miscellaneous (PDF):
  • EtherMeter Engineering Specifications
  • Inside Panel "Wiring/Setup" Label (Use Avery 5526 Vinyl Laser Label)
  
  

  ---

• Signalizer™
  4-20mA and Pulse Telemetry Signal Generator for Water Meter
  Model EMP
  
  • Datasheet/Manual
  • Datasheet/Manual, Neptune-Centric
  • Datasheet, Master Meter-Centric
  • Datasheet/Manual, Metron-Farnier-Centric
  • Datasheet/Manual, Sensus-Centric
  • Datasheet/Manual, evoQ4-Centric
  • Meter Compatibility Matrix (Encoder-Type Only)
  • New!: Pre-Start CheckList - Please Review!
  • Wiring Diagrams
  • NEMA-6P/IP-68 Option Datasheet
  Meter Compatibility: See Compatibility Matrix
  Endpoint Compatibility: Universal
  
  Application Notes (PDF):
  • Migration from Neptune Tricon/S to the Signalizer
  
  Miscellaneous (PDF):
  • Signalizer Engineering Specifications
  

---

• TheMeterDisplay™
  Remote Wall Display for Water Meter
  Model TMD
  
  • Datasheet/Manual/Wiring Diagram
  • Nicor Cable Kit Instructions
  • Application Note: Above-Vault Water Meter Display System for C&I Meters
  Meter Compatibility: See Compatibility Matrix
  Endpoint Compatibility: Universal
  
  

  ---

• Universal Duplexer for AMI Systems
  Model UDA
  
  • Datasheet/Manual
  • Wiring Diagram
  • UDA-Nicor Cable Retrofit Procedures
  • White Paper: Meter Sharing System for Metro & Regional Water Utilities
  Meter & Endpoint Compatibility: Universal
  
  

  ---

• Analog Pulse Kit
  4-20mA and Pulse Telemetry Signal Generator for Pulse-Type Water Meters
  Model APK
  
  • Datasheet/Manual
  • Datasheet, Master Meter Octave-Centric
  • NEMA-6P/IP-68 Option Datasheet
  Meter Compatibility: Most Dry-Contact-Pulse-Type Flow Meters.
  
  

  ---

• Analog Pulse Kit Plus
  4-20mA and Pulse Telemetry Signal Generator for Pulse-Type Water Meters + Display
  Model APK.PLUS
  
  • Datasheet/Manual
  • Datasheet, Master Meter Octave-Centric
  Meter Compatibility: Most Dry-Contact-Pulse-Type Flow Meters.
  
  

  ---

• AMI Duplexer for SCADA Systems - Din Rail Mount
  Model SDA
  
  • Datasheet/Specifications
  • Wiring Diagram
  Meter & Endpoint Compatibility: Universal
  
  

  ---

• AMI Duplexer for SCADA Systems - Wall Mount
  Model SDAW
  
  • Datasheet/Specifications
  • SDAW-Nicor Cable Retrofit Procedures
  
  Application Notes (PDF):
  • RRF001: Jumper Settings for the SDAW Version 107
  
  

  ---

• Encodalizer™
  Model MBE
  
  • Datasheet/Specifications
  
  Application Notes (PDF):
  Connect the Following Flow Meters to an AMI/AMR Network using
  Sensus-Protocol and/or Neptune Protocol:
  • Encodalizing the Endress+Hauser Promag W 400
  • Encodalizing the Flow-Tronic Torpee Mag
  • Encodalizing the Siemens FM Mag 6000
  
  

  ---

• 24VDC/20W Switching Power Supply
  Model MDR-20-24
  
  • Datasheet and Manual
  • Qualtek Power Cable Wiring Diagram
  
  

  ---

• 24VDC/40W Switching Power Supply
  Model MDR-40-24
  
  • Datasheet and Manual
  • Qualtek Power Cable Wiring Diagram
  
  

  ---

• Smart Bell 202 Modem for Radio Telemetry
  Model SB.202
  
  • Datasheet and Manual
  
  

  ---

• Leased Line Adapter for SB.202 Modem
  Model TL.202
  
  • Datasheet and Manual
  
  

  ---

• Bell 202 OEM Modem Module for Radio Telemetry
  Model B202
  
  • V.109 Modem Datasheet and Manual
  • V.103 Modem Datasheet and Manual
  
  Application Notes (PDF):
  • M001: Connecting the B202 to the Tecnet TM-2102 Mobile Radio
  • M002: Connecting the B202 to the Calamp DL-3400 Telemetry Radio
  • M003: Connecting the B202 to the Motorola CM200 Mobile Radio
  • M004: Desktop Computer Serial Comms with a Bell-202 Radio-Modem
  • M004: Connecting the B202 to the Ritron DTX+ Telemetry Radio
  • 023: Config. EtherMeter & Allen Bradley Comm Using the Bell 202 Modem.
  
  

  ---

• FM Telemetry Radio
  Ritron DTX Plus, Din-Rail-Mount Version
  
  • Datasheet
  • DTX Plus Service Manual
  
  

  ---

• Third-Party Information
  
  • Useful Links
  
  

  ---

• Legacy Documentation Center
  
  • Click here to access manuals and application notes for
  legacy models and firmware.
  
  In many (but not all) instances, Legacy-model hardware can be upgraded at the factory with the latest firmware. Costs may include shipping and a nominal re-flashing fee. Please contact us for details.
  
  

  ---